Re: setlineiems and UnitShip Cost
This WebDNA talk-list message is from 2000
It keeps the original formatting.
numero = 35700
interpreted = N
texte = nope, next?John Daviesjd@professionalideas.com_____________________________________________Martin Associates Design Agencyhttp://www.professionalideas.com> From: WebDNA Support
> Reply-To: (WebCatalog Talk)> Date: Thu, 3 Aug 2000 14:42:23> To: (WebCatalog Talk)> Subject: Re: setlineiems and UnitShip Cost> > UnitshipCost must be protected from being changed much like price is, try> putting in the password> parameter as I have below. If you have changed you default password then put> the appropriate password in.> [orderfile cart=[cart]]> [lineitems]> [setlineitem> > cart=[cart]&index=[lineindex]]texta=test&unitshipcost=0&password=password[/s> etlineitem]> [/lineitems] [/orderfile]> > Technical Support **********************************> Smith Micro, Internet Solutions Div | eCommerce (WebCatalog)> 16855 West Bernardo Drive, #380 | -------------------------> San Diego, CA 92127 | Software & Site Development> WebCatalog Support: (858) 675-0632 | http://www.smithmicro.com> Fax: (858) 675-0372 *********************************> > -----Original Message-----> From: WebCatalog Talk [mailto:WebDNA-Talk@talk.smithmicro.com]On> Behalf Of John Davies> Sent: Thursday, August 03, 2000 1:58 PM> To: WebCatalog Talk> Subject: Re: setlineiems and UnitShip Cost> > > No, it is set during the addlineitems. (i.e. pulled from the database) I am> trying to reset it because of some special shipping occurrences.> > We take orders from consumers on-line and via an 800# through the website.> We want to take distributor orders the same way, using the same site and> database. I have the different pricing stuctures per product already> working. When it comes to shipping however the consumers pay shipping and> handling, and the retailers pay shipping only. So, I need to reset the> unitshipcost to 0 to wipe the handling charge. So all I am trying to do is> reset the unitshipcost per item in the cart back to 0.> > So to answer your question . . . it is set elsewhere on the site, but it is> not over-written somewhere else in the code.> > (you have seen all of the WebDNA on the page)> > > John Davies> jd@professionalideas.com> _____________________________________________> Martin Associates Design Agency> http://www.professionalideas.com> > >> From: WebDNA Support >> Reply-To: (WebCatalog Talk)>> Date: Thu, 3 Aug 2000 13:39:42>> To: (WebCatalog Talk)>> Subject: Re: setlineiems and UnitShip Cost>> >> Is the UnitShipCost being over-written somewhere else in the code?>> >> Technical Support **********************************>> Smith Micro, Internet Solutions Div | eCommerce (WebCatalog)>> 16855 West Bernardo Drive, #380 | ------------------------->> San Diego, CA 92127 | Software & Site Development>> WebCatalog Support: (858) 675-0632 | http://www.smithmicro.com>> Fax: (858) 675-0372 *********************************>> >> -----Original Message----->> From: WebCatalog Talk [mailto:WebDNA-Talk@talk.smithmicro.com]On>> Behalf Of John Davies>> Sent: Thursday, August 03, 2000 11:55 AM>> To: WebCatalog Talk>> Subject: Re: setlineiems and UnitShip Cost>> >> >> Nope, same result. Any other ideas?>> >> >> John Davies>> jd@professionalideas.com>> _____________________________________________>> Martin Associates Design Agency>> http://www.professionalideas.com>> >> >>> >>> I believe you need to specify your database in the setlineitems.>>> >>> Brian Boegershausen>>> E-Commerce Programmer>>> >>>> Hello All,>>>> >>>> Any ideas on why this would not change my unit ship cost in my cart? The>>>> texta filed changes just fine, but the unitshipcost does not.>>>> >>>> >>>> [orderfile cart=[cart]]>>>> [lineitems]>>>> [setlineitem>>>> cart=[cart]&index=[lineindex]]texta=test&unitshipcost=0[/setlineitem]>>>> [/lineitems]>>>> [/orderfile]>>>> >>>> >>>> >>>> Thanks,>>>> >>>> John Davies>>>> jd@professionalideas.com>>>> _____________________________________________>>>> Martin Associates Design Agency>>>> http://www.professionalideas.com>>>> >> >> >> ------------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to>> >> Web Archive of this list is at: http://search.smithmicro.com/>> >> >> ------------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to>> >> Web Archive of this list is at: http://search.smithmicro.com/> > > -------------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to> > Web Archive of this list is at: http://search.smithmicro.com/> > > -------------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to> > Web Archive of this list is at: http://search.smithmicro.com/-------------------------------------------------------------This message is sent to you because you are subscribed to the mailing list .To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://search.smithmicro.com/
Associated Messages, from the most recent to the oldest:
nope, next?John Daviesjd@professionalideas.com_____________________________________________Martin Associates Design Agencyhttp://www.professionalideas.com> From: WebDNA Support > Reply-To: (WebCatalog Talk)> Date: Thu, 3 Aug 2000 14:42:23> To: (WebCatalog Talk)> Subject: Re: setlineiems and UnitShip Cost> > UnitshipCost must be protected from being changed much like price is, try> putting in the password> parameter as I have below. If you have changed you default password then put> the appropriate password in.> [orderfile cart=[cart]]> [lineitems]> [setlineitem> > cart=[cart]&index=[lineindex]]texta=test&unitshipcost=0&password=password[/s> etlineitem]> [/lineitems] [/orderfile]> > Technical Support **********************************> Smith Micro, Internet Solutions Div | eCommerce (WebCatalog)> 16855 West Bernardo Drive, #380 | -------------------------> San Diego, CA 92127 | Software & Site Development> WebCatalog Support: (858) 675-0632 | http://www.smithmicro.com> Fax: (858) 675-0372 *********************************> > -----Original Message-----> From: WebCatalog Talk [mailto:WebDNA-Talk@talk.smithmicro.com]On> Behalf Of John Davies> Sent: Thursday, August 03, 2000 1:58 PM> To: WebCatalog Talk> Subject: Re: setlineiems and UnitShip Cost> > > No, it is set during the addlineitems. (i.e. pulled from the database) I am> trying to reset it because of some special shipping occurrences.> > We take orders from consumers on-line and via an 800# through the website.> We want to take distributor orders the same way, using the same site and> database. I have the different pricing stuctures per product already> working. When it comes to shipping however the consumers pay shipping and> handling, and the retailers pay shipping only. So, I need to reset the> unitshipcost to 0 to wipe the handling charge. So all I am trying to do is> reset the unitshipcost per item in the cart back to 0.> > So to answer your question . . . it is set elsewhere on the site, but it is> not over-written somewhere else in the code.> > (you have seen all of the WebDNA on the page)> > > John Davies> jd@professionalideas.com> _____________________________________________> Martin Associates Design Agency> http://www.professionalideas.com> > >> From: WebDNA Support >> Reply-To: (WebCatalog Talk)>> Date: Thu, 3 Aug 2000 13:39:42>> To: (WebCatalog Talk)>> Subject: Re: setlineiems and UnitShip Cost>> >> Is the UnitShipCost being over-written somewhere else in the code?>> >> Technical Support **********************************>> Smith Micro, Internet Solutions Div | eCommerce (WebCatalog)>> 16855 West Bernardo Drive, #380 | ------------------------->> San Diego, CA 92127 | Software & Site Development>> WebCatalog Support: (858) 675-0632 | http://www.smithmicro.com>> Fax: (858) 675-0372 *********************************>> >> -----Original Message----->> From: WebCatalog Talk [mailto:WebDNA-Talk@talk.smithmicro.com]On>> Behalf Of John Davies>> Sent: Thursday, August 03, 2000 11:55 AM>> To: WebCatalog Talk>> Subject: Re: setlineiems and UnitShip Cost>> >> >> Nope, same result. Any other ideas?>> >> >> John Davies>> jd@professionalideas.com>> _____________________________________________>> Martin Associates Design Agency>> http://www.professionalideas.com>> >> >>> >>> I believe you need to specify your database in the setlineitems.>>> >>> Brian Boegershausen>>> E-Commerce Programmer>>> >>>> Hello All,>>>> >>>> Any ideas on why this would not change my unit ship cost in my cart? The>>>> texta filed changes just fine, but the unitshipcost does not.>>>> >>>> >>>> [orderfile cart=[cart]]>>>> [lineitems]>>>> [setlineitem>>>> cart=[cart]&index=[lineindex]]texta=test&unitshipcost=0[/setlineitem]>>>> [/lineitems]>>>> [/orderfile]>>>> >>>> >>>> >>>> Thanks,>>>> >>>> John Davies>>>> jd@professionalideas.com>>>> _____________________________________________>>>> Martin Associates Design Agency>>>> http://www.professionalideas.com>>>> >> >> >> ------------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to>> >> Web Archive of this list is at: http://search.smithmicro.com/>> >> >> ------------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to>> >> Web Archive of this list is at: http://search.smithmicro.com/> > > -------------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to> > Web Archive of this list is at: http://search.smithmicro.com/> > > -------------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to> > Web Archive of this list is at: http://search.smithmicro.com/-------------------------------------------------------------This message is sent to you because you are subscribed to the mailing list .To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://search.smithmicro.com/
John Davies
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
WebCatalog 4.0.1 has been released! (2000)
OT: WebObjects (2000)
Review comparison by PC Magazine: Open for On-line Business (1997)
Date Formats (1997)
WebCatalog NT beta 18 problem (1997)
WebDNA dying or ... ? (2005)
E-Mail (1998)
WebCat & Backoffice Solution? (2000)
Price + Texte (1999)
Re:E-Mailer (WebCatb15acgiMac) (1997)
nesting limits? (1998)
Authenticate (1997)
WCS Newbie question (1997)
[WebDNA] WebDNA.us Website ?'s (2008)
mySQL GROUP BY Aggregate Function Problem (2005)
Followup question re: checksum for credit cards? (1997)
[OT] - Credit card processing company fees (2004)
MacAuthorize and WebCatalog Questions (2000)
Some Advise needed (1997)
View order not right (1997)