Re: WebCatalog.acgi quitting with error Type 2
This WebDNA talk-list message is from 1998
It keeps the original formatting.
numero = 15995
interpreted = N
texte = On 2/12/98 7:44 PM, Gary Richter so noted...>>I've been getting WebCatalog set up on a new webserver -- Umax J700 w/ >>344 meg ram, 266 Mhz G3 upgrade and fast/wide hard drive. I'm running the >>.acgi so I can set its memory requirements separately from those of the >>webserver (WebTen) itself. Currently, in anticipation of some large >>databases, WebCatalog is set to 140 meg. Unfortunately, WebCatalog has >>begun to unexpectedly quit with an error type 2 (three times today >>alone). I haven't been able to find any pattern to the errors, and the >>server is only getting light traffic. Does WebCatalog have any known >>problems with the G3? > >I have 2 G3's running webcat and one gets hammered and the other light >traffic and they both run just fine. What version of webcat are you using? >I will have to check the size of my data bases but I have webcat.acgi set >at 8 megs on all machines. If it was at the factory default mem settings >it choked a little. I messed around in 2 meg increments and found 8 in my >case worked pretty well. More than that and no change. 4 or 6 and it >would slow down or puke on large templates with the to many nested tags >problem. Now I use webstar for these machines OS8.1 and OT1.3. > >=============================================== >Gary Richter > PanaVise Products, Inc. > 7540 Colbert Dr. Reno, Nevada 89511 > Ph: 702.850.2900 Fx: 702.850.2929 > Email: grichter@panavise.com > http://www.panavise.com >===============================================I'm running WebCatalog 2.0.1. Today the Type 2 errors stopped, and instead, the webserver locked up solid, requiring a reboot. Each time, the Logs showed that the last page served was a .tmpl file. This evening, I tried going back to the plug-in, upping WebTen's RAM to accomodate our databases. Thought it was working ok, but then had another crash. The server log this time, instead of having the last couple pages served, had a few raw lines from one of my databases! Very scary! Rob Marquardt Designer/Resident Wirehead Toast Design300 First Avenue North, Suite 150 Minneapolis MN 55401 612.330.9863 v 612.321.9424 f www.toastdesign.com
Associated Messages, from the most recent to the oldest:
On 2/12/98 7:44 PM, Gary Richter so noted...>>I've been getting WebCatalog set up on a new webserver -- Umax J700 w/ >>344 meg ram, 266 Mhz G3 upgrade and fast/wide hard drive. I'm running the >>.acgi so I can set its memory requirements separately from those of the >>webserver (WebTen) itself. Currently, in anticipation of some large >>databases, WebCatalog is set to 140 meg. Unfortunately, WebCatalog has >>begun to unexpectedly quit with an error type 2 (three times today >>alone). I haven't been able to find any pattern to the errors, and the >>server is only getting light traffic. Does WebCatalog have any known >>problems with the G3? > >I have 2 G3's running webcat and one gets hammered and the other light >traffic and they both run just fine. What version of webcat are you using? >I will have to check the size of my data bases but I have webcat.acgi set >at 8 megs on all machines. If it was at the factory default mem settings >it choked a little. I messed around in 2 meg increments and found 8 in my >case worked pretty well. More than that and no change. 4 or 6 and it >would slow down or puke on large templates with the to many nested tags >problem. Now I use webstar for these machines OS8.1 and OT1.3. > >=============================================== >Gary Richter > PanaVise Products, Inc. > 7540 Colbert Dr. Reno, Nevada 89511 > Ph: 702.850.2900 Fx: 702.850.2929 > Email: grichter@panavise.com > http://www.panavise.com >===============================================I'm running WebCatalog 2.0.1. Today the Type 2 errors stopped, and instead, the webserver locked up solid, requiring a reboot. Each time, the Logs showed that the last page served was a .tmpl file. This evening, I tried going back to the plug-in, upping WebTen's RAM to accomodate our databases. Thought it was working ok, but then had another crash. The server log this time, instead of having the last couple pages served, had a few raw lines from one of my databases! Very scary! Rob Marquardt Designer/Resident Wirehead Toast Design300 First Avenue North, Suite 150 Minneapolis MN 55401 612.330.9863 v 612.321.9424 f www.toastdesign.com
Rob Marquardt
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
WebCat ignoring Shopping Cart Folder (2001)
summ=T (2003)
webcatalog [date] bug...not (1999)
Fwd: HTML encoding in URLs (1997)
no [search] with NT (1997)
WebDNA-Talk Digest mode broken (1997)
Search and path arguments (1998)
Out of the woodwork (2007)
Quit revisited (1997)
[AppendFile] problem (WebCat2b13 Mac .acgi) (1997)
Web*SSL and WebCatalog (1997)
WebCat2: Items xx to xx shown, etc. (1997)
[ShowIf] and empty fields (1997)
sort problems....bug or brain fart? (1997)
Multiple prices (1997)
WC1.6 to WC2 date formatting -FIXED! (1997)
Sorting by date (1997)
SKU's (2000)
Anomaly ? causes NT application event log to overflow (1997)
Internet Advancement (2003)