3-4.1 probelm

This WebDNA talk-list message is from

2000


It keeps the original formatting.
numero = 34293
interpreted = N
texte = on 7/6/2000 5:25 PM, Kenneth Grome at ken@simplewebstores.com wrote:I am trying here to see if I can get any feedback.AJM Thanks Ken. I have just checked, the now deactivated, 4.x prefs to make sure that my insecuretextvars was set to 1 (I did that BEFORE installing it). It is still set to that.As far as spaces, unless you caught one in my code, I don't use them. I always use _ for readability.I am looking forward to some response from SM regarding the code snippet below. The symptoms here regarding a page that will not show recent data unless a flushdatabases is done is inconsistent with the fundamental logic of WebCatalog, is it not? Data should always be available is placed into a database running in RAM. It may not get to hard disk if you never commit the data, but it was certainly available until the db closes. Lastly, regarding the search code...if we even think that we need to explore that I would ask why a page will not show data until a flushdatabases occurs and then show that data in all it's glory with 0 changes to the code in 'question'. thoughts? ajm > These are the two best-known -- but still undocumented -- changes in > webcat 4 that cause certain pre-existing sites to fail: > > 1- The variable hierarchy has been changed in webcat 4. You can no > longer use formvariables to override text variables unless you change > the insecuretextvars preference to 1 or change your [text] tags to > [text secure=f]. > > 2- Webcat 1, 2 and 3 can handle spaces in db field and parameter > names, but webcat 4 cannot. There is no simple fix for this problem, > you have to manually remove these spaces in all your templates and db > files if you want them to work with webcat 4. > > > >> Below is code that worked like a charm with 3.0.7 but when we upgraded to >> 4.0.1 today took a powder. >> >> Specifically this code updated 2 databases, sent an email and then >> redirected to a page. In the old world as soon as the append occurred the >> record was available via a standard search (on another page). As soon as we >> went to 4.0.1 the _only_ way to get the search setup to see the new post is >> with a flushdatabase command. (bad). >> >> >> Now since this is MISSION critical I had to go back to 3.0.7 and testing >> this under 4.x is going to be a real pain until I can get a test machine >> setup for this. >> >> Any obvious thoughts from the tried and battle scarred 4.x testers? >> >> AJM >> >> >> >> >> [showif [action]=Appendtask] >> [replace >> db=forums.db&eqMessageIDdatarq=[_tk_SKU]&append=T]messageid=[url][_tk_sku][/ >> url]&Forum=[LOOKUP >> db=project.db&value=[P_SKU_pass]&lookInField=P_SKU&returnField=P_Sku¬Foun >> d=]&PostTime=[url][Time %I:%M %p][/url]&PostDate=[url][Date >> %m-%d-%Y][/url]&Name=[url][_TK_AUTHOR][/url]&Email=[url][Email][/url]&replyt >> o=NewTopic&Topic=[url][_TK_Task][/url]&Message=[url][_TK_COMMENT][/url]&IPAd >> dress=[IPAddress][/replace] >> [commitdatabase db=forums.db] >> [replace >> db=task.db&eqTK_SKUdatarq=[url][_TK_SKU][/url]&append=T][formvariables >> name=_&exact=F][getchars >> start=2][name][/getchars]=[url][value][/url]&[/formvariables][/replace] >> Record Added
>> [commitdatabase db=task.db] >> [SendMail to=members@newworldmedia.com&subject=New Task for [projectname] >> assigned to [LOOKUP >> db=staff.db&value=[_TK_Owner]&lookInField=S_SKU&returnField=S_First_Name¬ >> Found=] - NWM FORUMS&from=managetool@newworldmedia.com] >> Forum: [ProjectName] >> Task: [_TK_Task] >> Owner: [LOOKUP >> db=staff.db&value=[_TK_Owner]&lookInField=S_SKU&returnField=S_First_Name¬ >> Found=] >> Author: [LOOKUP >> db=staff.db&value=[_TK_Author]&lookInField=S_SKU&returnField=S_First_Name&no >> tFound=] >> >> PostTime: [_TK_Modification_Time] >> PostDate: [_TK_MODHISTORY] >> Message: >> ------------- >> [_TK_COMMENT] >> ------------- >> [/SendMail] >> [redirect forum.nmpl?forum=[_TK_projectid]&skunum=[_TK_projectid]] >> [/showif] >> Alex J. McCombie (800-724-8973) http://OurClients.com Corporate http://McCombie.com Personal (Alex@McCombie.com) http://ClubGab.com/ <--- Now here's a serious Chat Room! ---> ############################################################# This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to To switch to the INDEX mode, E-mail to Send administrative queries to Associated Messages, from the most recent to the oldest:

    
  1. 3-4.1 probelm (Alex McCombie 2000)
on 7/6/2000 5:25 PM, Kenneth Grome at ken@simplewebstores.com wrote:I am trying here to see if I can get any feedback.AJM Thanks Ken. I have just checked, the now deactivated, 4.x prefs to make sure that my insecuretextvars was set to 1 (I did that BEFORE installing it). It is still set to that.As far as spaces, unless you caught one in my code, I don't use them. I always use _ for readability.I am looking forward to some response from SM regarding the code snippet below. The symptoms here regarding a page that will not show recent data unless a flushdatabases is done is inconsistent with the fundamental logic of WebCatalog, is it not? Data should always be available is placed into a database running in RAM. It may not get to hard disk if you never commit the data, but it was certainly available until the db closes. Lastly, regarding the search code...if we even think that we need to explore that I would ask why a page will not show data until a flushdatabases occurs and then show that data in all it's glory with 0 changes to the code in 'question'. thoughts? ajm > These are the two best-known -- but still undocumented -- changes in > webcat 4 that cause certain pre-existing sites to fail: > > 1- The variable hierarchy has been changed in webcat 4. You can no > longer use formvariables to override text variables unless you change > the insecuretextvars preference to 1 or change your [text] tags to > [text secure=f]. > > 2- Webcat 1, 2 and 3 can handle spaces in db field and parameter > names, but webcat 4 cannot. There is no simple fix for this problem, > you have to manually remove these spaces in all your templates and db > files if you want them to work with webcat 4. > > > >> Below is code that worked like a charm with 3.0.7 but when we upgraded to >> 4.0.1 today took a powder. >> >> Specifically this code updated 2 databases, sent an email and then >> redirected to a page. In the old world as soon as the append occurred the >> record was available via a standard search (on another page). As soon as we >> went to 4.0.1 the _only_ way to get the search setup to see the new post is >> with a flushdatabase command. (bad). >> >> >> Now since this is MISSION critical I had to go back to 3.0.7 and testing >> this under 4.x is going to be a real pain until I can get a test machine >> setup for this. >> >> Any obvious thoughts from the tried and battle scarred 4.x testers? >> >> AJM >> >> >> >> >> [showif [action]=Appendtask] >> [replace >> db=forums.db&eqMessageIDdatarq=[_tk_SKU]&append=T]messageid=[url][_tk_sku][/ >> url]&Forum=[LOOKUP >> db=project.db&value=[P_SKU_pass]&lookInField=P_SKU&returnField=P_Sku¬Foun >> d=]&PostTime=[url][Time %I:%M %p][/url]&PostDate=[url][Date >> %m-%d-%Y][/url]&Name=[url][_TK_AUTHOR][/url]&Email=[url][Email][/url]&replyt >> o=NewTopic&Topic=[url][_TK_Task][/url]&Message=[url][_TK_COMMENT][/url]&IPAd >> dress=[ipaddress][/replace] >> [commitdatabase db=forums.db] >> [replace >> db=task.db&eqTK_SKUdatarq=[url][_TK_SKU][/url]&append=T][formvariables >> name=_&exact=F][getchars >> start=2][name][/getchars]=[url][value][/url]&[/formvariables][/replace] >> Record Added
>> [commitdatabase db=task.db] >> [SendMail to=members@newworldmedia.com&subject=New Task for [projectname] >> assigned to [LOOKUP >> db=staff.db&value=[_TK_Owner]&lookInField=S_SKU&returnField=S_First_Name¬ >> Found=] - NWM FORUMS&from=managetool@newworldmedia.com] >> Forum: [ProjectName] >> Task: [_TK_Task] >> Owner: [LOOKUP >> db=staff.db&value=[_TK_Owner]&lookInField=S_SKU&returnField=S_First_Name¬ >> Found=] >> Author: [LOOKUP >> db=staff.db&value=[_TK_Author]&lookInField=S_SKU&returnField=S_First_Name&no >> tFound=] >> >> PostTime: [_TK_Modification_Time] >> PostDate: [_TK_MODHISTORY] >> Message: >> ------------- >> [_TK_COMMENT] >> ------------- >> [/SendMail] >> [redirect forum.nmpl?forum=[_TK_projectid]&skunum=[_TK_projectid]] >> [/showif] >> Alex J. McCombie (800-724-8973) http://OurClients.com Corporate http://McCombie.com Personal (Alex@McCombie.com) http://ClubGab.com/ <--- Now here's a serious Chat Room! ---> ############################################################# This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to To switch to the INDEX mode, E-mail to Send administrative queries to Alex McCombie

DOWNLOAD WEBDNA NOW!

Top Articles:

Talk List

The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...

Related Readings:

[OT] Mac WebCat 3 for IIS (2000) Webstar 1.3.1 PPC (1997) View order not right (1997) Problem with broken images (2004) The List is Changing (1997) sendmail and accented characters (1998) [WebDNA] A note about the WebDNA Server 8.0.2 installer and Admin (2015) unable to launch acgi in WebCat (1997) sort links (2002) Webstar 1.3.1 PPC (1997) keeping carts... (2005) Linux vs Jaguar (OSX) (2002) Make sure I understand this??? (1997) Bug - 4.5 (2002) Auction (2007) A multi-processor savvy WebCatalog? (1997) list/menus (2000) Emailer choke (1997) This is an odd error (2001) Email and name capture (1999)