Re: Freeze
This WebDNA talk-list message is from 2003
It keeps the original formatting.
numero = 47729
interpreted = N
texte = There was a button, you had to know where and what to look for on the older boards. It was not the power button.On Thursday, February 13, 2003, at 01:53 PM, Michael Davis wrote:> I have not tried it. I suppose you would use the power key on the > front of the box. It wouldn't be too hard to test, I suppose. > > On Wednesday, February 12, 2003, at 06:39 PM, Stuart Tremain wrote: > >> Is this still available on the new G4 boxes ? >> >> On Thursday, February 13, 2003, at 01:30 PM, Michael Davis wrote: >> >>> On the older macs prior to USB, it's also a good idea to discharge >>> the power supply before removing batteries and pushing the memory >>> unit reset button. To do this, disconnect the power cord and then >>> press the keyboard power key (adb cord still plugged in, of course). >>> On my desktop beige G3 box, there's enough of a charge to get a >>> startup chime and a momentary fan! >>> >>> On Wednesday, February 12, 2003, at 01:59 PM, Stuart Tremain wrote: >>>> LAST RESORT >>>> >>>> Reset the board. This involves turning the power off, taking out >>>> the battery, leaving disconnected for a while and then finding the >>>> reset button. >>>> >>>> This was shown to me by an Apple engineer, it worked in my >>>> situation on an older model Mac, not sure if it can be done with >>>> the new boxes. It may take a bit of research. >>>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> ------------------------------------------------------------- >>> This message is sent to you because you are subscribed to >>> the mailing list
. >>> To unsubscribe, E-mail to: >>> To switch to the DIGEST mode, E-mail to >>> >>> Web Archive of this list is at: http://webdna.smithmicro.com/ >>> > > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > > Web Archive of this list is at: http://webdna.smithmicro.com/ > > RegardsStuart Tremain idfk web developments 114a/40 yeo street neutral bay 2089 australia t +612 9908 2134 f +612 9908 4837------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Associated Messages, from the most recent to the oldest:
There was a button, you had to know where and what to look for on the older boards. It was not the power button.On Thursday, February 13, 2003, at 01:53 PM, Michael Davis wrote:> I have not tried it. I suppose you would use the power key on the > front of the box. It wouldn't be too hard to test, I suppose. > > On Wednesday, February 12, 2003, at 06:39 PM, Stuart Tremain wrote: > >> Is this still available on the new G4 boxes ? >> >> On Thursday, February 13, 2003, at 01:30 PM, Michael Davis wrote: >> >>> On the older macs prior to USB, it's also a good idea to discharge >>> the power supply before removing batteries and pushing the memory >>> unit reset button. To do this, disconnect the power cord and then >>> press the keyboard power key (adb cord still plugged in, of course). >>> On my desktop beige G3 box, there's enough of a charge to get a >>> startup chime and a momentary fan! >>> >>> On Wednesday, February 12, 2003, at 01:59 PM, Stuart Tremain wrote: >>>> LAST RESORT >>>> >>>> Reset the board. This involves turning the power off, taking out >>>> the battery, leaving disconnected for a while and then finding the >>>> reset button. >>>> >>>> This was shown to me by an Apple engineer, it worked in my >>>> situation on an older model Mac, not sure if it can be done with >>>> the new boxes. It may take a bit of research. >>>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> ------------------------------------------------------------- >>> This message is sent to you because you are subscribed to >>> the mailing list . >>> To unsubscribe, E-mail to: >>> To switch to the DIGEST mode, E-mail to >>> >>> Web Archive of this list is at: http://webdna.smithmicro.com/ >>> > > > ------------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > To switch to the DIGEST mode, E-mail to > > Web Archive of this list is at: http://webdna.smithmicro.com/ > > RegardsStuart Tremain idfk web developments 114a/40 yeo street neutral bay 2089 australia t +612 9908 2134 f +612 9908 4837------------------------------------------------------------- This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to Web Archive of this list is at: http://webdna.smithmicro.com/
Stuart Tremain
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
users change an email address (2002)
Upcoming 2.1 Release and PCS Committment (1997)
Hiding HTML and page breaks (1997)
WebCat B13 Mac CGI -- Frames question (1997)
WebCat2 - storing unformatted date data? (1997)
[Price] (1997)
Re:E-mailer application times out (1998)
Force leading zeros (1998)
simple forum/bboard (2004)
OT - quiet on the list today - here's something (2004)
another database converted to WebDNA (1999)
Nested [SEARCH] and [REPLACE] problem. (1997)
Question on lineitems (2002)
Credit card processing - UK (1997)
textarea inputs and returns (1999)
Authenticate (1999)
Sendmail truncation in Eudora Clients (1998)
All choices on IE different than Netscape (1997)
Summing fields (1997)
sorting question... (2001)