Re: [BULK] Fwd: [WebDNA] [BULK] WebDNA discovery in the Console - [having many crashes]
This WebDNA talk-list message is from 2011
It keeps the original formatting.
numero = 106528
interpreted = N
texte = My logic concurs :) Palle On 13/04/2011, at 19.54, christophe.billiottet@webdna.us wrote: > I think both problems are connected. >=20 > - chris >=20 > On Apr 13, 2011, at 14:48, Palle Bo Nielsen wrote: >=20 >> Hi >>=20 >> Basically this is a fresh Mac OS X 10.6 Server installation, fully = upgraded to the latest version. WebDNA 6.2 and the most recent = ImageMagick Binary installed as well. >>=20 >> I have have no idea when the "500 errors per sec" started and nor = have I any idea of what has initiated it within my WebDNA code. I too = somehow suspect my code as being the root cause, but it seems to have = happened suddenly without me adding or changing the code at all. >>=20 >> One of the major tasks I have done after the errors and crashed = occurred was to moved my site to a new server (spec'ed above). But both = the old server and the new server behaved the same. >>=20 >> I will try to take a look at loop and includes but I am already quite = confident that this is not the root cause since there are quite few of = them and I have checked them already. But I will try again. >>=20 >> This one concerns me though... >>=20 >>>>>> --- snip --- >>>>>> 04/13/2011 06:34:27 SHOWPAGE 091.153.253.064 = Error: WebCatalog does not have enough memory to complete this command = /forum/default.tpl = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl >>>>>> --- snip --- >>=20 >> All the best and thanks for the advise so far. >> Palle >>=20 >> On 13/04/2011, at 19.35, christophe.billiottet@webdna.us wrote: >>=20 >>> No, it is not. But remember your first message showing that you had = more than 500 errors per second. When did the problem appeared? was it = after an OS upgrade? after a modification of your code? i need as much = information as possible, because as far as i know, we have never had any = similar experience. >>>=20 >>>=20 >>>> SYSTEM.LOG >>>> ---- start snippet ---- >>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:56: --- last message repeated 499 times --- >>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:59: --- last message repeated 499 times --- >>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> ---- end snippet ---- >>>=20 >>>=20 >>>=20 >>>=20 >>> On Apr 13, 2011, at 14:17, Palle Bo Nielsen wrote: >>>=20 >>>> Mammoth !!! >>>>=20 >>>> My largest DB is 723.000 records (<20 fields) weighing 260 MB - is = that Mammoth to WebDNA? >>>>=20 >>>> Palle >>>>=20 >>>>=20 >>>> On 13/04/2011, at 17.47, christophe.billiottet@webdna.us wrote: >>>>=20 >>>>> If there is 6GB available and you do not work with mammoth = databases, it is probably a loop somewhere: for instance if you = [include] A within B and then B within A, you could possibly create such = a RAM problem. >>>>>=20 >>>>> - chris >>>>>=20 >>>>>=20 >>>>> On Apr 13, 2011, at 12:32, Palle Bo Nielsen wrote: >>>>>=20 >>>>>> Dear Christophe, >>>>>>=20 >>>>>> I would like to do that but it would be approx. 5.000 lines of = code. >>>>>>=20 >>>>>> Btw, if RAM should be the problem despite the facts from earlier = in this thread. What would be the most optimal settings in the WebDNA = Admin area? Furthermore, would there be any recommendations related to = settings of the Mac OS X Server Admin or any other area to avoid = memory-problems like this? >>>>>>=20 >>>>>> Br >>>>>> Palle >>>>>>=20 >>>>>>=20 >>>>>> On 13/04/2011, at 17.25, christophe.billiottet@webdna.us wrote: >>>>>>=20 >>>>>>> Certainly! WebDNA runs fine with a 64MB VPS server. You would = probably have to share with us the code of the page = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl. Chances are = there is a problem with it. >>>>>>>=20 >>>>>>> - chris >>>>>>>=20 >>>>>>>=20 >>>>>>> On Apr 13, 2011, at 12:13, Palle Bo Nielsen wrote: >>>>>>>=20 >>>>>>>> Dear Christophe, >>>>>>>>=20 >>>>>>>> On this particular server, there is only 4 sites running (3 = which are very passive and 1 which is fairly active). >>>>>>>>=20 >>>>>>>> Applications running... >>>>>>>>=20 >>>>>>>> - Apache (Mac OS X Server incl. Mail Service activated - low = activity) >>>>>>>> - WebDNA (500 MB RAM - 46 DB's) >>>>>>>> - ImageMagick (almost passive) >>>>>>>> - Intermapper (4 MB RAM) >>>>>>>> - Simon (20 MB RAM) >>>>>>>>=20 >>>>>>>> Total Active Memory Footprint ~ 2 GB. 6 GB Unused - Total 8 GB = RAM >>>>>>>>=20 >>>>>>>> WebDNA should have plenty of RAM at it's disposal >>>>>>>>=20 >>>>>>>> ?? >>>>>>>>=20 >>>>>>>> Palle >>>>>>>>=20 >>>>>>>>=20 >>>>>>>>=20 >>>>>>>> On 13/04/2011, at 13.03, christophe.billiottet@webdna.us wrote: >>>>>>>>=20 >>>>>>>>> Hi Palle! how many websites on your server? do you run other = applications than apache and WebDNA, like PHP, MySQL, a mailserver or = others? did you check in your WebDNA administration how many bases are = open in RAM? is the RAM problem coincides with the server crash? >>>>>>>>>=20 >>>>>>>>> - chris=20 >>>>>>>>>=20 >>>>>>>>>=20 >>>>>>>>> On Apr 13, 2011, at 7:42, Palle Bo Nielsen wrote: >>>>>>>>>=20 >>>>>>>>>> Hi Christipher et al, >>>>>>>>>>=20 >>>>>>>>>> Well now the error reporting system is actually reporting. >>>>>>>>>>=20 >>>>>>>>>> I get this error...: >>>>>>>>>>=20 >>>>>>>>>> --- snip --- >>>>>>>>>> 04/13/2011 06:34:27 SHOWPAGE 091.153.253.064 = Error: WebCatalog does not have enough memory to complete this command = /forum/default.tpl = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl >>>>>>>>>> --- snip --- >>>>>>>>>>=20 >>>>>>>>>> How does that compute since the server has 8GB RAM at it's = disposal? >>>>>>>>>>=20 >>>>>>>>>> I hope to get some inspiration on this one since my server is = crashing several time every 24H. >>>>>>>>>>=20 >>>>>>>>>> Any good ideas/suggestion...? >>>>>>>>>>=20 >>>>>>>>>> Palle >>>>>>>>>>=20 >>>>>>>>>>=20 >>>>>>>>>> On 10/04/2011, at 16.28, christophe.billiottet@webdna.us = wrote: >>>>>>>>>>=20 >>>>>>>>>>> To me, it looks like a code error loop that would be logged = by the "Log Error Messages" turned on. >>>>>>>>>>>=20 >>>>>>>>>>> - chris >>>>>>>>>>>=20 >>>>>>>>>>>=20 >>>>>>>>>>> On Apr 10, 2011, at 3:25, Palle Bo Nielsen wrote: >>>>>>>>>>>=20 >>>>>>>>>>>> God morning all (Danish time), >>>>>>>>>>>>=20 >>>>>>>>>>>> I posted this one to the talk-list some time ago, but it = did not get any reaction. So now I repost it again since my problems i = increasing although there has not been any changes to the server config = or WebDNA code. >>>>>>>>>>>>=20 >>>>>>>>>>>> I hope to get some good ideas from the creative community. >>>>>>>>>>>>=20 >>>>>>>>>>>> All the best >>>>>>>>>>>> Palle >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>> Begin forwarded message: >>>>>>>>>>>>=20 >>>>>>>>>>>>> From: Palle Bo Nielsen
>>>>>>>>>>>>> Date: 26. mar 2011 15.20.00 CET >>>>>>>>>>>>> To: talk@webdna.us >>>>>>>>>>>>> Subject: [WebDNA] [BULK] WebDNA discovery in the Console - = [having many crashes] >>>>>>>>>>>>> Reply-To: >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Hi all, >>>>>>>>>>>>>=20 >>>>>>>>>>>>> In the past weeks I have experienced irregularities on my = server which causes WebDNA to hang with a log of CPU usage (more than = 100% constantly) and it will not resolve before I kill the process or = restart the server (CPU). This is of cause bad since the visitors are = not allowed to visit the websites on the server while this is happening. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Due to this I have done som inspection to the Console logs = and found the following which I find interesting and suppecious. Are any = of you fellow list-members able to help me out here, weather this could = have anything to do woth my descibtion or maybe give a good advise based = on the following to log snippets. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> SYSTEM.LOG >>>>>>>>>>>>> ---- start snippet ---- >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:56: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:59: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> ---- end snippet ---- >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Every time my web-service goes to it's knees a lot of = these one are to be found in the access_log - and I mean MANY abd they = dont disappear before a restart of service or CPU. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> APACHE2 - ACCESS_LOG >>>>>>>>>>>>> ---- start snippet ---- >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:01 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:30 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:57 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:45 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:40 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:22 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:17 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:20 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ---- end snippet ---- >>>>>>>>>>>>>=20 >>>>>>>>>>>>> All the best >>>>>>>>>>>>> = Palle--------------------------------------------------------- >>>>>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>>>>> the mailing list . >>>>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>>>>=20 >>>>>>>>>>>> --------------------------------------------------------- = This message is sent to you because you are subscribed to the mailing = list . To unsubscribe, E-mail to: archives: = http://mail.webdna.us/list/talk@webdna.us Bug Reporting: = support@webdna.us >>>>>>>>>>>=20 >>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>>> the mailing list . >>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>>=20 >>>>>>>>>> --------------------------------------------------------- >>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>> the mailing list . >>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>=20 >>>>>>>>> --------------------------------------------------------- >>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>> the mailing list . >>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>=20 >>>>>>>=20 >>>>>>> --------------------------------------------------------- >>>>>>> This message is sent to you because you are subscribed to >>>>>>> the mailing list . >>>>>>> To unsubscribe, E-mail to: >>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>> Bug Reporting: support@webdna.us >>>>>>=20 >>>>>=20 >>>>> --------------------------------------------------------- >>>>> This message is sent to you because you are subscribed to >>>>> the mailing list . >>>>> To unsubscribe, E-mail to: >>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>> Bug Reporting: support@webdna.us >>>>=20 >>>> --------------------------------------------------------- >>>> This message is sent to you because you are subscribed to >>>> the mailing list . >>>> To unsubscribe, E-mail to: >>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>> Bug Reporting: support@webdna.us >>>=20 >>> --------------------------------------------------------- >>> This message is sent to you because you are subscribed to >>> the mailing list . >>> To unsubscribe, E-mail to: >>> archives: http://mail.webdna.us/list/talk@webdna.us >>> Bug Reporting: support@webdna.us >>=20 >> --------------------------------------------------------- >> This message is sent to you because you are subscribed to >> the mailing list . >> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us >> Bug Reporting: support@webdna.us >=20 > --------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us > Bug Reporting: support@webdna.us
Associated Messages, from the most recent to the oldest:
My logic concurs :) Palle On 13/04/2011, at 19.54, christophe.billiottet@webdna.us wrote: > I think both problems are connected. >=20 > - chris >=20 > On Apr 13, 2011, at 14:48, Palle Bo Nielsen wrote: >=20 >> Hi >>=20 >> Basically this is a fresh Mac OS X 10.6 Server installation, fully = upgraded to the latest version. WebDNA 6.2 and the most recent = ImageMagick Binary installed as well. >>=20 >> I have have no idea when the "500 errors per sec" started and nor = have I any idea of what has initiated it within my WebDNA code. I too = somehow suspect my code as being the root cause, but it seems to have = happened suddenly without me adding or changing the code at all. >>=20 >> One of the major tasks I have done after the errors and crashed = occurred was to moved my site to a new server (spec'ed above). But both = the old server and the new server behaved the same. >>=20 >> I will try to take a look at loop and includes but I am already quite = confident that this is not the root cause since there are quite few of = them and I have checked them already. But I will try again. >>=20 >> This one concerns me though... >>=20 >>>>>> --- snip --- >>>>>> 04/13/2011 06:34:27 SHOWPAGE 091.153.253.064 = Error: WebCatalog does not have enough memory to complete this command = /forum/default.tpl = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl >>>>>> --- snip --- >>=20 >> All the best and thanks for the advise so far. >> Palle >>=20 >> On 13/04/2011, at 19.35, christophe.billiottet@webdna.us wrote: >>=20 >>> No, it is not. But remember your first message showing that you had = more than 500 errors per second. When did the problem appeared? was it = after an OS upgrade? after a modification of your code? i need as much = information as possible, because as far as i know, we have never had any = similar experience. >>>=20 >>>=20 >>>> SYSTEM.LOG >>>> ---- start snippet ---- >>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:56: --- last message repeated 499 times --- >>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> Mar 26 05:36:59: --- last message repeated 499 times --- >>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 exceeded 500 = log message per second limit - remaining messages this second = discarded *** >>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection = with the module.=20 >>>> ---- end snippet ---- >>>=20 >>>=20 >>>=20 >>>=20 >>> On Apr 13, 2011, at 14:17, Palle Bo Nielsen wrote: >>>=20 >>>> Mammoth !!! >>>>=20 >>>> My largest DB is 723.000 records (<20 fields) weighing 260 MB - is = that Mammoth to WebDNA? >>>>=20 >>>> Palle >>>>=20 >>>>=20 >>>> On 13/04/2011, at 17.47, christophe.billiottet@webdna.us wrote: >>>>=20 >>>>> If there is 6GB available and you do not work with mammoth = databases, it is probably a loop somewhere: for instance if you = [include] A within B and then B within A, you could possibly create such = a RAM problem. >>>>>=20 >>>>> - chris >>>>>=20 >>>>>=20 >>>>> On Apr 13, 2011, at 12:32, Palle Bo Nielsen wrote: >>>>>=20 >>>>>> Dear Christophe, >>>>>>=20 >>>>>> I would like to do that but it would be approx. 5.000 lines of = code. >>>>>>=20 >>>>>> Btw, if RAM should be the problem despite the facts from earlier = in this thread. What would be the most optimal settings in the WebDNA = Admin area? Furthermore, would there be any recommendations related to = settings of the Mac OS X Server Admin or any other area to avoid = memory-problems like this? >>>>>>=20 >>>>>> Br >>>>>> Palle >>>>>>=20 >>>>>>=20 >>>>>> On 13/04/2011, at 17.25, christophe.billiottet@webdna.us wrote: >>>>>>=20 >>>>>>> Certainly! WebDNA runs fine with a 64MB VPS server. You would = probably have to share with us the code of the page = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl. Chances are = there is a problem with it. >>>>>>>=20 >>>>>>> - chris >>>>>>>=20 >>>>>>>=20 >>>>>>> On Apr 13, 2011, at 12:13, Palle Bo Nielsen wrote: >>>>>>>=20 >>>>>>>> Dear Christophe, >>>>>>>>=20 >>>>>>>> On this particular server, there is only 4 sites running (3 = which are very passive and 1 which is fairly active). >>>>>>>>=20 >>>>>>>> Applications running... >>>>>>>>=20 >>>>>>>> - Apache (Mac OS X Server incl. Mail Service activated - low = activity) >>>>>>>> - WebDNA (500 MB RAM - 46 DB's) >>>>>>>> - ImageMagick (almost passive) >>>>>>>> - Intermapper (4 MB RAM) >>>>>>>> - Simon (20 MB RAM) >>>>>>>>=20 >>>>>>>> Total Active Memory Footprint ~ 2 GB. 6 GB Unused - Total 8 GB = RAM >>>>>>>>=20 >>>>>>>> WebDNA should have plenty of RAM at it's disposal >>>>>>>>=20 >>>>>>>> ?? >>>>>>>>=20 >>>>>>>> Palle >>>>>>>>=20 >>>>>>>>=20 >>>>>>>>=20 >>>>>>>> On 13/04/2011, at 13.03, christophe.billiottet@webdna.us wrote: >>>>>>>>=20 >>>>>>>>> Hi Palle! how many websites on your server? do you run other = applications than apache and WebDNA, like PHP, MySQL, a mailserver or = others? did you check in your WebDNA administration how many bases are = open in RAM? is the RAM problem coincides with the server crash? >>>>>>>>>=20 >>>>>>>>> - chris=20 >>>>>>>>>=20 >>>>>>>>>=20 >>>>>>>>> On Apr 13, 2011, at 7:42, Palle Bo Nielsen wrote: >>>>>>>>>=20 >>>>>>>>>> Hi Christipher et al, >>>>>>>>>>=20 >>>>>>>>>> Well now the error reporting system is actually reporting. >>>>>>>>>>=20 >>>>>>>>>> I get this error...: >>>>>>>>>>=20 >>>>>>>>>> --- snip --- >>>>>>>>>> 04/13/2011 06:34:27 SHOWPAGE 091.153.253.064 = Error: WebCatalog does not have enough memory to complete this command = /forum/default.tpl = /Library/WebServer/Documents/sites/macnyt/forum/default.tpl >>>>>>>>>> --- snip --- >>>>>>>>>>=20 >>>>>>>>>> How does that compute since the server has 8GB RAM at it's = disposal? >>>>>>>>>>=20 >>>>>>>>>> I hope to get some inspiration on this one since my server is = crashing several time every 24H. >>>>>>>>>>=20 >>>>>>>>>> Any good ideas/suggestion...? >>>>>>>>>>=20 >>>>>>>>>> Palle >>>>>>>>>>=20 >>>>>>>>>>=20 >>>>>>>>>> On 10/04/2011, at 16.28, christophe.billiottet@webdna.us = wrote: >>>>>>>>>>=20 >>>>>>>>>>> To me, it looks like a code error loop that would be logged = by the "Log Error Messages" turned on. >>>>>>>>>>>=20 >>>>>>>>>>> - chris >>>>>>>>>>>=20 >>>>>>>>>>>=20 >>>>>>>>>>> On Apr 10, 2011, at 3:25, Palle Bo Nielsen wrote: >>>>>>>>>>>=20 >>>>>>>>>>>> God morning all (Danish time), >>>>>>>>>>>>=20 >>>>>>>>>>>> I posted this one to the talk-list some time ago, but it = did not get any reaction. So now I repost it again since my problems i = increasing although there has not been any changes to the server config = or WebDNA code. >>>>>>>>>>>>=20 >>>>>>>>>>>> I hope to get some good ideas from the creative community. >>>>>>>>>>>>=20 >>>>>>>>>>>> All the best >>>>>>>>>>>> Palle >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>>=20 >>>>>>>>>>>> Begin forwarded message: >>>>>>>>>>>>=20 >>>>>>>>>>>>> From: Palle Bo Nielsen >>>>>>>>>>>>> Date: 26. mar 2011 15.20.00 CET >>>>>>>>>>>>> To: talk@webdna.us >>>>>>>>>>>>> Subject: [WebDNA] [BULK] WebDNA discovery in the Console - = [having many crashes] >>>>>>>>>>>>> Reply-To: >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Hi all, >>>>>>>>>>>>>=20 >>>>>>>>>>>>> In the past weeks I have experienced irregularities on my = server which causes WebDNA to hang with a log of CPU usage (more than = 100% constantly) and it will not resolve before I kill the process or = restart the server (CPU). This is of cause bad since the visitors are = not allowed to visit the websites on the server while this is happening. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Due to this I have done som inspection to the Console logs = and found the following which I find interesting and suppecious. Are any = of you fellow list-members able to help me out here, weather this could = have anything to do woth my descibtion or maybe give a good advise based = on the following to log snippets. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> SYSTEM.LOG >>>>>>>>>>>>> ---- start snippet ---- >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:56: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> Mar 26 05:36:59: --- last message repeated 499 times --- >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 = exceeded 500 log message per second limit - remaining messages this = second discarded *** >>>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish = connection with the module.=20 >>>>>>>>>>>>> ---- end snippet ---- >>>>>>>>>>>>>=20 >>>>>>>>>>>>> Every time my web-service goes to it's knees a lot of = these one are to be found in the access_log - and I mean MANY abd they = dont disappear before a restart of service or CPU. >>>>>>>>>>>>>=20 >>>>>>>>>>>>> APACHE2 - ACCESS_LOG >>>>>>>>>>>>> ---- start snippet ---- >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:01 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:30 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:57 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:45 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:40 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:22 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:17 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:20 +0100] "OPTIONS * HTTP/1.0" = 200 - >>>>>>>>>>>>> ---- end snippet ---- >>>>>>>>>>>>>=20 >>>>>>>>>>>>> All the best >>>>>>>>>>>>> = Palle--------------------------------------------------------- >>>>>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>>>>> the mailing list . >>>>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>>>>=20 >>>>>>>>>>>> --------------------------------------------------------- = This message is sent to you because you are subscribed to the mailing = list . To unsubscribe, E-mail to: archives: = http://mail.webdna.us/list/talk@webdna.us Bug Reporting: = support@webdna.us >>>>>>>>>>>=20 >>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>>> the mailing list . >>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>>=20 >>>>>>>>>> --------------------------------------------------------- >>>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>>> the mailing list . >>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>>=20 >>>>>>>>> --------------------------------------------------------- >>>>>>>>> This message is sent to you because you are subscribed to >>>>>>>>> the mailing list . >>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>>>> Bug Reporting: support@webdna.us >>>>>>>>=20 >>>>>>>=20 >>>>>>> --------------------------------------------------------- >>>>>>> This message is sent to you because you are subscribed to >>>>>>> the mailing list . >>>>>>> To unsubscribe, E-mail to: >>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>>>> Bug Reporting: support@webdna.us >>>>>>=20 >>>>>=20 >>>>> --------------------------------------------------------- >>>>> This message is sent to you because you are subscribed to >>>>> the mailing list . >>>>> To unsubscribe, E-mail to: >>>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>>> Bug Reporting: support@webdna.us >>>>=20 >>>> --------------------------------------------------------- >>>> This message is sent to you because you are subscribed to >>>> the mailing list . >>>> To unsubscribe, E-mail to: >>>> archives: http://mail.webdna.us/list/talk@webdna.us >>>> Bug Reporting: support@webdna.us >>>=20 >>> --------------------------------------------------------- >>> This message is sent to you because you are subscribed to >>> the mailing list . >>> To unsubscribe, E-mail to: >>> archives: http://mail.webdna.us/list/talk@webdna.us >>> Bug Reporting: support@webdna.us >>=20 >> --------------------------------------------------------- >> This message is sent to you because you are subscribed to >> the mailing list . >> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us >> Bug Reporting: support@webdna.us >=20 > --------------------------------------------------------- > This message is sent to you because you are subscribed to > the mailing list . > To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us > Bug Reporting: support@webdna.us
Palle Bo Nielsen
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
[ShowIf] and empty fields (1997)
Re[2]: HELP: OS X Problem... (2000)
OSX Users .. (2002)
Need Sample Template - just purchased (1997)
[ot] authorize.net was re: unzip (2005)
Problems getting parameters passed into email. (1997)
Leap Day Triggers? -confirmation- (2000)
Counting LineItems (2000)
XMLparse odd behaviour (2004)
Special characters in field names (1998)
Online reference (1997)
Converting native excel files (2001)
Still having problems with Authen (1997)
Multiple fields on 1 input (1997)
GrandTotal not right (1997)
Thanks for tips, more quest (1997)
Macauth: Dates and No Scripting... (1997)
Resetting a Formvariable (2000)
Multi Colonns (1998)
Running 2 two WebCatalog.acgi's (1996)