Re: [BULK] Fwd: [WebDNA] [BULK] WebDNA discovery in the Console - [having many crashes]
This WebDNA talk-list message is from 2011
It keeps the original formatting.
numero = 106526
interpreted = N
texte = HiBasically this is a fresh Mac OS X 10.6 Server installation, fully =upgraded to the latest version. WebDNA 6.2 and the most recent =ImageMagick Binary installed as well.I have have no idea when the "500 errors per sec" started and nor have I =any idea of what has initiated it within my WebDNA code. I too somehow =suspect my code as being the root cause, but it seems to have happened =suddenly without me adding or changing the code at all.One of the major tasks I have done after the errors and crashed occurred =was to moved my site to a new server (spec'ed above). But both the old =server and the new server behaved the same.I will try to take a look at loop and includes but I am already quite =confident that this is not the root cause since there are quite few of =them and I have checked them already. But I will try again.This one concerns me though...>>>> --- snip --->>>> 04/13/201106:34:27SHOWPAGE091.153.253.064Error: =WebCatalog does not have enough memory to complete this command=/forum/default.tpl=/Library/WebServer/Documents/sites/macnyt/forum/default.tpl>>>> --- snip ---All the best and thanks for the advise so far.PalleOn 13/04/2011, at 19.35, christophe.billiottet@webdna.us wrote:> No, it is not. But remember your first message showing that you had =more than 500 errors per second. When did the problem appeared? was it =after an OS upgrade? after a modification of your code? i need as much =information as possible, because as far as i know, we have never had any =similar experience.>=20>=20>> SYSTEM.LOG>> ---- start snippet ---->> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:56: --- last message repeated 499 times --->> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:58: --- last message repeated 499 times --->> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:58: --- last message repeated 499 times --->> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:59: --- last message repeated 499 times --->> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection =with the module.=20>> ---- end snippet ---->=20>=20>=20>=20> On Apr 13, 2011, at 14:17, Palle Bo Nielsen wrote:>=20>> Mammoth !!!>>=20>> My largest DB is 723.000 records (<20 fields) weighing 260 MB - is =that Mammoth to WebDNA?>>=20>> Palle>>=20>>=20>> On 13/04/2011, at 17.47, christophe.billiottet@webdna.us wrote:>>=20>>> If there is 6GB available and you do not work with mammoth =databases, it is probably a loop somewhere: for instance if you =[include] A within B and then B within A, you could possibly create such =a RAM problem.>>>=20>>> - chris>>>=20>>>=20>>> On Apr 13, 2011, at 12:32, Palle Bo Nielsen wrote:>>>=20>>>> Dear Christophe,>>>>=20>>>> I would like to do that but it would be approx. 5.000 lines of =code.>>>>=20>>>> Btw, if RAM should be the problem despite the facts from earlier in =this thread. What would be the most optimal settings in the WebDNA Admin =area? Furthermore, would there be any recommendations related to =settings of the Mac OS X Server Admin or any other area to avoid =memory-problems like this?>>>>=20>>>> Br>>>> Palle>>>>=20>>>>=20>>>> On 13/04/2011, at 17.25, christophe.billiottet@webdna.us wrote:>>>>=20>>>>> Certainly! WebDNA runs fine with a 64MB VPS server. You would =probably have to share with us the code of the page =/Library/WebServer/Documents/sites/macnyt/forum/default.tpl. Chances are =there is a problem with it.>>>>>=20>>>>> - chris>>>>>=20>>>>>=20>>>>> On Apr 13, 2011, at 12:13, Palle Bo Nielsen wrote:>>>>>=20>>>>>> Dear Christophe,>>>>>>=20>>>>>> On this particular server, there is only 4 sites running (3 which =are very passive and 1 which is fairly active).>>>>>>=20>>>>>> Applications running...>>>>>>=20>>>>>> - Apache (Mac OS X Server incl. Mail Service activated - low =activity)>>>>>> - WebDNA (500 MB RAM - 46 DB's)>>>>>> - ImageMagick (almost passive)>>>>>> - Intermapper (4 MB RAM)>>>>>> - Simon (20 MB RAM)>>>>>>=20>>>>>> Total Active Memory Footprint ~ 2 GB. 6 GB Unused - Total 8 GB =RAM>>>>>>=20>>>>>> WebDNA should have plenty of RAM at it's disposal>>>>>>=20>>>>>> ??>>>>>>=20>>>>>> Palle>>>>>>=20>>>>>>=20>>>>>>=20>>>>>> On 13/04/2011, at 13.03, christophe.billiottet@webdna.us wrote:>>>>>>=20>>>>>>> Hi Palle! how many websites on your server? do you run other =applications than apache and WebDNA, like PHP, MySQL, a mailserver or =others? did you check in your WebDNA administration how many bases are =open in RAM? is the RAM problem coincides with the server crash?>>>>>>>=20>>>>>>> - chris=20>>>>>>>=20>>>>>>>=20>>>>>>> On Apr 13, 2011, at 7:42, Palle Bo Nielsen wrote:>>>>>>>=20>>>>>>>> Hi Christipher et al,>>>>>>>>=20>>>>>>>> Well now the error reporting system is actually reporting.>>>>>>>>=20>>>>>>>> I get this error...:>>>>>>>>=20>>>>>>>> --- snip --->>>>>>>> 04/13/201106:34:27SHOWPAGE091.153.253.064=Error: WebCatalog does not have enough memory to complete this command=/forum/default.tpl=/Library/WebServer/Documents/sites/macnyt/forum/default.tpl>>>>>>>> --- snip --->>>>>>>>=20>>>>>>>> How does that compute since the server has 8GB RAM at it's =disposal?>>>>>>>>=20>>>>>>>> I hope to get some inspiration on this one since my server is =crashing several time every 24H.>>>>>>>>=20>>>>>>>> Any good ideas/suggestion...?>>>>>>>>=20>>>>>>>> Palle>>>>>>>>=20>>>>>>>>=20>>>>>>>> On 10/04/2011, at 16.28, christophe.billiottet@webdna.us wrote:>>>>>>>>=20>>>>>>>>> To me, it looks like a code error loop that would be logged by =the "Log Error Messages" turned on.>>>>>>>>>=20>>>>>>>>> - chris>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>> On Apr 10, 2011, at 3:25, Palle Bo Nielsen wrote:>>>>>>>>>=20>>>>>>>>>> God morning all (Danish time),>>>>>>>>>>=20>>>>>>>>>> I posted this one to the talk-list some time ago, but it did =not get any reaction. So now I repost it again since my problems i =increasing although there has not been any changes to the server config =or WebDNA code.>>>>>>>>>>=20>>>>>>>>>> I hope to get some good ideas from the creative community.>>>>>>>>>>=20>>>>>>>>>> All the best>>>>>>>>>> Palle>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>> Begin forwarded message:>>>>>>>>>>=20>>>>>>>>>>> From: Palle Bo Nielsen
>>>>>>>>>>> Date: 26. mar 2011 15.20.00 CET>>>>>>>>>>> To: talk@webdna.us>>>>>>>>>>> Subject: [WebDNA] [BULK] WebDNA discovery in the Console - =[having many crashes]>>>>>>>>>>> Reply-To: >>>>>>>>>>>=20>>>>>>>>>>> Hi all,>>>>>>>>>>>=20>>>>>>>>>>> In the past weeks I have experienced irregularities on my =server which causes WebDNA to hang with a log of CPU usage (more than =100% constantly) and it will not resolve before I kill the process or =restart the server (CPU). This is of cause bad since the visitors are =not allowed to visit the websites on the server while this is happening.>>>>>>>>>>>=20>>>>>>>>>>> Due to this I have done som inspection to the Console logs =and found the following which I find interesting and suppecious. Are any =of you fellow list-members able to help me out here, weather this could =have anything to do woth my descibtion or maybe give a good advise based =on the following to log snippets.>>>>>>>>>>>=20>>>>>>>>>>> SYSTEM.LOG>>>>>>>>>>> ---- start snippet ---->>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:56: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:59: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> ---- end snippet ---->>>>>>>>>>>=20>>>>>>>>>>> Every time my web-service goes to it's knees a lot of these =one are to be found in the access_log - and I mean MANY abd they dont =disappear before a restart of service or CPU.>>>>>>>>>>>=20>>>>>>>>>>> APACHE2 - ACCESS_LOG>>>>>>>>>>> ---- start snippet ---->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:01 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:30 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:57 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:45 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:40 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:22 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:17 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:20 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ---- end snippet ---->>>>>>>>>>>=20>>>>>>>>>>> All the best>>>>>>>>>>> =Palle--------------------------------------------------------->>>>>>>>>>> This message is sent to you because you are subscribed to>>>>>>>>>>> the mailing list .>>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>>>>=20>>>>>>>>>> --------------------------------------------------------- =This message is sent to you because you are subscribed to the mailing =list . To unsubscribe, E-mail to: archives: =http://mail.webdna.us/list/talk@webdna.us Bug Reporting: =support@webdna.us>>>>>>>>>=20>>>>>>>>> --------------------------------------------------------->>>>>>>>> This message is sent to you because you are subscribed to>>>>>>>>> the mailing list .>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>>=20>>>>>>>> --------------------------------------------------------->>>>>>>> This message is sent to you because you are subscribed to>>>>>>>> the mailing list .>>>>>>>> To unsubscribe, E-mail to: >>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>=20>>>>>>> --------------------------------------------------------->>>>>>> This message is sent to you because you are subscribed to>>>>>>> the mailing list .>>>>>>> To unsubscribe, E-mail to: >>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>> Bug Reporting: support@webdna.us>>>>>>=20>>>>>=20>>>>> --------------------------------------------------------->>>>> This message is sent to you because you are subscribed to>>>>> the mailing list .>>>>> To unsubscribe, E-mail to: >>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>> Bug Reporting: support@webdna.us>>>>=20>>>=20>>> --------------------------------------------------------->>> This message is sent to you because you are subscribed to>>> the mailing list .>>> To unsubscribe, E-mail to: >>> archives: http://mail.webdna.us/list/talk@webdna.us>>> Bug Reporting: support@webdna.us>>=20>> --------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us>> Bug Reporting: support@webdna.us>=20> ---------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us> Bug Reporting: support@webdna.us
Associated Messages, from the most recent to the oldest:
HiBasically this is a fresh Mac OS X 10.6 Server installation, fully =upgraded to the latest version. WebDNA 6.2 and the most recent =ImageMagick Binary installed as well.I have have no idea when the "500 errors per sec" started and nor have I =any idea of what has initiated it within my WebDNA code. I too somehow =suspect my code as being the root cause, but it seems to have happened =suddenly without me adding or changing the code at all.One of the major tasks I have done after the errors and crashed occurred =was to moved my site to a new server (spec'ed above). But both the old =server and the new server behaved the same.I will try to take a look at loop and includes but I am already quite =confident that this is not the root cause since there are quite few of =them and I have checked them already. But I will try again.This one concerns me though...>>>> --- snip --->>>> 04/13/201106:34:27SHOWPAGE091.153.253.064Error: =WebCatalog does not have enough memory to complete this command=/forum/default.tpl=/Library/WebServer/Documents/sites/macnyt/forum/default.tpl>>>> --- snip ---All the best and thanks for the advise so far.PalleOn 13/04/2011, at 19.35, christophe.billiottet@webdna.us wrote:> No, it is not. But remember your first message showing that you had =more than 500 errors per second. When did the problem appeared? was it =after an OS upgrade? after a modification of your code? i need as much =information as possible, because as far as i know, we have never had any =similar experience.>=20>=20>> SYSTEM.LOG>> ---- start snippet ---->> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:56: --- last message repeated 499 times --->> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:58: --- last message repeated 499 times --->> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:58: --- last message repeated 499 times --->> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection =with the module.=20>> Mar 26 05:36:59: --- last message repeated 499 times --->> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 exceeded 500 log =message per second limit - remaining messages this second discarded =***>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish connection =with the module.=20>> ---- end snippet ---->=20>=20>=20>=20> On Apr 13, 2011, at 14:17, Palle Bo Nielsen wrote:>=20>> Mammoth !!!>>=20>> My largest DB is 723.000 records (<20 fields) weighing 260 MB - is =that Mammoth to WebDNA?>>=20>> Palle>>=20>>=20>> On 13/04/2011, at 17.47, christophe.billiottet@webdna.us wrote:>>=20>>> If there is 6GB available and you do not work with mammoth =databases, it is probably a loop somewhere: for instance if you =[include] A within B and then B within A, you could possibly create such =a RAM problem.>>>=20>>> - chris>>>=20>>>=20>>> On Apr 13, 2011, at 12:32, Palle Bo Nielsen wrote:>>>=20>>>> Dear Christophe,>>>>=20>>>> I would like to do that but it would be approx. 5.000 lines of =code.>>>>=20>>>> Btw, if RAM should be the problem despite the facts from earlier in =this thread. What would be the most optimal settings in the WebDNA Admin =area? Furthermore, would there be any recommendations related to =settings of the Mac OS X Server Admin or any other area to avoid =memory-problems like this?>>>>=20>>>> Br>>>> Palle>>>>=20>>>>=20>>>> On 13/04/2011, at 17.25, christophe.billiottet@webdna.us wrote:>>>>=20>>>>> Certainly! WebDNA runs fine with a 64MB VPS server. You would =probably have to share with us the code of the page =/Library/WebServer/Documents/sites/macnyt/forum/default.tpl. Chances are =there is a problem with it.>>>>>=20>>>>> - chris>>>>>=20>>>>>=20>>>>> On Apr 13, 2011, at 12:13, Palle Bo Nielsen wrote:>>>>>=20>>>>>> Dear Christophe,>>>>>>=20>>>>>> On this particular server, there is only 4 sites running (3 which =are very passive and 1 which is fairly active).>>>>>>=20>>>>>> Applications running...>>>>>>=20>>>>>> - Apache (Mac OS X Server incl. Mail Service activated - low =activity)>>>>>> - WebDNA (500 MB RAM - 46 DB's)>>>>>> - ImageMagick (almost passive)>>>>>> - Intermapper (4 MB RAM)>>>>>> - Simon (20 MB RAM)>>>>>>=20>>>>>> Total Active Memory Footprint ~ 2 GB. 6 GB Unused - Total 8 GB =RAM>>>>>>=20>>>>>> WebDNA should have plenty of RAM at it's disposal>>>>>>=20>>>>>> ??>>>>>>=20>>>>>> Palle>>>>>>=20>>>>>>=20>>>>>>=20>>>>>> On 13/04/2011, at 13.03, christophe.billiottet@webdna.us wrote:>>>>>>=20>>>>>>> Hi Palle! how many websites on your server? do you run other =applications than apache and WebDNA, like PHP, MySQL, a mailserver or =others? did you check in your WebDNA administration how many bases are =open in RAM? is the RAM problem coincides with the server crash?>>>>>>>=20>>>>>>> - chris=20>>>>>>>=20>>>>>>>=20>>>>>>> On Apr 13, 2011, at 7:42, Palle Bo Nielsen wrote:>>>>>>>=20>>>>>>>> Hi Christipher et al,>>>>>>>>=20>>>>>>>> Well now the error reporting system is actually reporting.>>>>>>>>=20>>>>>>>> I get this error...:>>>>>>>>=20>>>>>>>> --- snip --->>>>>>>> 04/13/201106:34:27SHOWPAGE091.153.253.064=Error: WebCatalog does not have enough memory to complete this command=/forum/default.tpl=/Library/WebServer/Documents/sites/macnyt/forum/default.tpl>>>>>>>> --- snip --->>>>>>>>=20>>>>>>>> How does that compute since the server has 8GB RAM at it's =disposal?>>>>>>>>=20>>>>>>>> I hope to get some inspiration on this one since my server is =crashing several time every 24H.>>>>>>>>=20>>>>>>>> Any good ideas/suggestion...?>>>>>>>>=20>>>>>>>> Palle>>>>>>>>=20>>>>>>>>=20>>>>>>>> On 10/04/2011, at 16.28, christophe.billiottet@webdna.us wrote:>>>>>>>>=20>>>>>>>>> To me, it looks like a code error loop that would be logged by =the "Log Error Messages" turned on.>>>>>>>>>=20>>>>>>>>> - chris>>>>>>>>>=20>>>>>>>>>=20>>>>>>>>> On Apr 10, 2011, at 3:25, Palle Bo Nielsen wrote:>>>>>>>>>=20>>>>>>>>>> God morning all (Danish time),>>>>>>>>>>=20>>>>>>>>>> I posted this one to the talk-list some time ago, but it did =not get any reaction. So now I repost it again since my problems i =increasing although there has not been any changes to the server config =or WebDNA code.>>>>>>>>>>=20>>>>>>>>>> I hope to get some good ideas from the creative community.>>>>>>>>>>=20>>>>>>>>>> All the best>>>>>>>>>> Palle>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>>=20>>>>>>>>>> Begin forwarded message:>>>>>>>>>>=20>>>>>>>>>>> From: Palle Bo Nielsen >>>>>>>>>>> Date: 26. mar 2011 15.20.00 CET>>>>>>>>>>> To: talk@webdna.us>>>>>>>>>>> Subject: [WebDNA] [BULK] WebDNA discovery in the Console - =[having many crashes]>>>>>>>>>>> Reply-To: >>>>>>>>>>>=20>>>>>>>>>>> Hi all,>>>>>>>>>>>=20>>>>>>>>>>> In the past weeks I have experienced irregularities on my =server which causes WebDNA to hang with a log of CPU usage (more than =100% constantly) and it will not resolve before I kill the process or =restart the server (CPU). This is of cause bad since the visitors are =not allowed to visit the websites on the server while this is happening.>>>>>>>>>>>=20>>>>>>>>>>> Due to this I have done som inspection to the Console logs =and found the following which I find interesting and suppecious. Are any =of you fellow list-members able to help me out here, weather this could =have anything to do woth my descibtion or maybe give a good advise based =on the following to log snippets.>>>>>>>>>>>=20>>>>>>>>>>> SYSTEM.LOG>>>>>>>>>>> ---- start snippet ---->>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:56: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:56 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:57 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:58: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:58 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> Mar 26 05:36:59: --- last message repeated 499 times --->>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: *** process 125 =exceeded 500 log message per second limit - remaining messages this =second discarded ***>>>>>>>>>>> Mar 26 05:36:59 minione WebDNA[125]: Could not establish =connection with the module.=20>>>>>>>>>>> ---- end snippet ---->>>>>>>>>>>=20>>>>>>>>>>> Every time my web-service goes to it's knees a lot of these =one are to be found in the access_log - and I mean MANY abd they dont =disappear before a restart of service or CPU.>>>>>>>>>>>=20>>>>>>>>>>> APACHE2 - ACCESS_LOG>>>>>>>>>>> ---- start snippet ---->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:01 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:30 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:16:57 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:45 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:38 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:40 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:41 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:22 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:17 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ::1 - - [26/Mar/2011:09:17:20 +0100] "OPTIONS * HTTP/1.0" =200 ->>>>>>>>>>> ---- end snippet ---->>>>>>>>>>>=20>>>>>>>>>>> All the best>>>>>>>>>>> =Palle--------------------------------------------------------->>>>>>>>>>> This message is sent to you because you are subscribed to>>>>>>>>>>> the mailing list .>>>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>>>>=20>>>>>>>>>> --------------------------------------------------------- =This message is sent to you because you are subscribed to the mailing =list . To unsubscribe, E-mail to: archives: =http://mail.webdna.us/list/talk@webdna.us Bug Reporting: =support@webdna.us>>>>>>>>>=20>>>>>>>>> --------------------------------------------------------->>>>>>>>> This message is sent to you because you are subscribed to>>>>>>>>> the mailing list .>>>>>>>>> To unsubscribe, E-mail to: >>>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>>=20>>>>>>>> --------------------------------------------------------->>>>>>>> This message is sent to you because you are subscribed to>>>>>>>> the mailing list .>>>>>>>> To unsubscribe, E-mail to: >>>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>>> Bug Reporting: support@webdna.us>>>>>>>=20>>>>>>> --------------------------------------------------------->>>>>>> This message is sent to you because you are subscribed to>>>>>>> the mailing list .>>>>>>> To unsubscribe, E-mail to: >>>>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>>>> Bug Reporting: support@webdna.us>>>>>>=20>>>>>=20>>>>> --------------------------------------------------------->>>>> This message is sent to you because you are subscribed to>>>>> the mailing list .>>>>> To unsubscribe, E-mail to: >>>>> archives: http://mail.webdna.us/list/talk@webdna.us>>>>> Bug Reporting: support@webdna.us>>>>=20>>>=20>>> --------------------------------------------------------->>> This message is sent to you because you are subscribed to>>> the mailing list .>>> To unsubscribe, E-mail to: >>> archives: http://mail.webdna.us/list/talk@webdna.us>>> Bug Reporting: support@webdna.us>>=20>> --------------------------------------------------------->> This message is sent to you because you are subscribed to>> the mailing list .>> To unsubscribe, E-mail to: >> archives: http://mail.webdna.us/list/talk@webdna.us>> Bug Reporting: support@webdna.us>=20> ---------------------------------------------------------> This message is sent to you because you are subscribed to> the mailing list .> To unsubscribe, E-mail to: > archives: http://mail.webdna.us/list/talk@webdna.us> Bug Reporting: support@webdna.us
Palle Bo Nielsen
DOWNLOAD WEBDNA NOW!
Top Articles:
Talk List
The WebDNA community talk-list is the best place to get some help: several hundred extremely proficient programmers with an excellent knowledge of WebDNA and an excellent spirit will deliver all the tips and tricks you can imagine...
Related Readings:
Document Contains No Data, Blank Pages with b4, b6 mac! (1999)
NY taxRates.db? (1997)
Stopping bad HTML propagation ? (1997)
Okay, I give up... (1999)
[HTML*] (a proposition) (1997)
Warning: Mac OS X 10.2.4 Update Overwrites Apache'shttpd.conf (2003)
CommitDatabase vs. CloseDatabase (2001)
emailer on Windows Beta 18 (1997)
Help with [LineItems] in [OrderFile] on ShoppingCart.tpl (2003)
Pre-flight public flag (1997)
Separate SSL Server (1997)
Authenticate (2000)
Updating a database once per day - An example (1998)
Secure Server basic question... (1997)
Help! WebCat2 bug (1997)
Hosts who have upgraded to v5.0? (2003)
[WebDNA] Webserver does not respond occasionally (2018)
Revisit: speed test (2002)
off topic - dna snipets (1997)
[showif]/[hideif] question (1997)